I:XMT
(XMZ) series
intelligent digital display controller is a kind of high performance
intelligent apparatus; its main characteristic is as follows:
This apparatus applies to the sensor such as temperature,
flow, humidity and liquid level or transmitter and various voltages
and current input signal. it can display, control and transmitting
for above mentioned parameters.
With linear zing microchip technology, it has higher
precision in the range of entire measurement.
Can set control value for the upper and lower limit
of each input signal, and this value will not be lost when power
failure.
For thermocouple type sensor, it has a automatic temperature
compensation in the range of 0℃-100℃.
It has a sensor broken line protection function.
II:XJY series intelligent digital display polling meter
is a kind of high performance and  intelligent
meter, its main characteristic is as follows:
This meter applies to the sensor such as temperature,
pressure, rate of flow, humidity and liquid level etc. or transmitter
and various voltages and current input signal. It can poll display
the above parameters and alarm at the upper and lower limit.
With linear zing microchip technology. It has higher precision
in the range of entire measurement.
Can set alarm value for the top and bottom limit of
each input signal, and the value will not be lost when power
failure.
For thermocouple type sensor, it has a automatic temperature
compensation in the range of 0℃~ 100℃.
It has a sensor line broken protection function.
Polling progress can be carried out by manful or automatically.
III:ZN4735 series of digital panel meter
Can bused directly in measure AC and DC voltage and
current. If matches with inductance transformer it can measure
5-2000A AC current. Matches current divider, it can measure
2-2000ADC current. Directly join with three-wire system Pt100
and Cu50 resistance sensor, can measure temperature. Match standard
signal transmitter to be used to measure temperature, humidity,
acidity, pressure, liquid level, displacement etc. all measure
signals can be converted to standard signal (4-20mA, 0-10mA,
1-5V and 0-5V) to transmit output.
For some models frequently use, for example the AC
5A,DC75mV, DC4-20mA, models, the measurement range can be customized
by users.
IV:The LK5130/513 5
Digital Panel Meter is one of our LK series digital type panel
meter products. It has perfect linear performance and high precision
DC voltmeter. This meter uses a high-precision voltage reference
source with temperature automatic compensation function, so
it has a small temperature coefficient and works stability.
It is widely used on the measurement of voltage, current, temperature,
humidity, acidity, luminosity, pressure and displacement signals.
Model LK5130:input DC voltage is ±99.9mV(nominal
as 0.1v or 100mV), it is also can be customized
to the models of measure range of 1V, 10V,100V and etc.)
Model LK5135: input DC voltage is ±199.9Mv(nominal
as 0.2V or 200mV), it is also can be customized to the models
of measure range of 2V, 20V,200V and etc.
|
